Should You Keep Gas or Switch to All-Electric?

keep gas or switch to all-electric is a practical comparison topic because the right answer depends on your address, meter, appliances, usage pattern and current plan. This guide focuses on Australian households and explains what to check before you switch, renew or rely on a headline rate.

Quick answer

Switching to all-electric can make sense when appliances are due for replacement, the home has solar or efficient reverse-cycle and heat pump options are available. Keeping gas may be practical if equipment is new, upfront costs are high or the home has limited electrical capacity. Compare whole-of-home costs.

Key takeaways

• The best time to switch is often when a gas appliance needs replacement.
• All-electric homes can avoid ongoing gas supply charges.
• Solar and batteries can improve the economics of electric appliances.
• Upfront upgrade costs, wiring and switchboard capacity matter.
• Gas safety, ventilation and servicing should be part of the decision.

Why this topic matters

Energy plans can look simple until the bill arrives. A household can see a different result because of fixed daily supply charges, time-based usage rates, controlled load, concessions, solar export credits, seasonal gas heating or a meter read that was estimated rather than actual. That is why a useful comparison starts with your own bill and then checks the official plan documents.

energy.gov.au's electrification, heating and hot-water guidance supports comparing efficient electric options alongside existing gas appliances, rather than assuming a like-for-like replacement. This matters because a comparison that ignores those details can make a weak plan look attractive. The goal is not to guess the cheapest plan from one advertised number. The goal is to understand the cost structure well enough to compare like for like.

What to check first

• List every gas appliance and its age.
• Check whether gas is only used for one appliance.
• Compare replacement options: induction, heat pump hot water and reverse-cycle heating.
• Ask an electrician about switchboard and circuit capacity.
• Check rebates before committing to any upgrade.

If the topic affects an appliance, also check whether the appliance is near replacement age. A plan decision and an appliance decision can point in different directions. For example, a household may choose a plan that suits today's gas heater, but the better long-term move could be comparing efficient electric heating before replacing that heater with another gas model.

How to compare plans

Use a recent bill as your baseline. Write down the billing period, usage, fixed charge, usage rate, tariff type and any discounts or concessions. Then compare the same assumptions across each plan. If one offer uses a different tariff structure, adjust the comparison rather than treating the headline rate as equivalent.

For electricity, that can mean separating general usage, controlled load, solar feed-in and peak or off-peak windows. For gas, that can mean separating supply charges from winter heating, hot water and cooking use. If you cannot separate those items precisely, use several bills and look for the pattern rather than relying on one unusually high or low period.

State and eligibility notes

Policy, rebates and gas-connection rules differ by state and council area. Always check local rules before planning a major retrofit.

Eligibility can also depend on the retailer, distributor, meter type, account name, property type or concession status. Before acting, check the retailer's written plan summary, the current government or regulator page and the latest bill for your address.

Common mistakes

• Replacing a failed gas appliance in a rush without comparing electric alternatives.
• Ignoring the fixed gas supply charge after most appliances have moved electric.
• Underestimating switchboard or installation costs.
• Comparing fuel prices without appliance efficiency.

A practical example

Imagine two households with the same total annual energy spend. One has high usage because of winter heating, while the other has low usage but a high fixed daily charge. The first household may benefit most from a lower usage rate or more efficient appliances. The second may benefit more from a lower supply charge or removing an unnecessary fuel connection. The same advertised discount would not solve both problems.

This is also why state averages should be treated carefully. Averages can help you sanity-check a bill, but they do not replace address-level pricing, network-zone context or your own appliance behaviour. The more unusual your home is, such as solar, a battery, controlled load, medical equipment, LPG or an embedded network, the more important those details become.

When to act

The best time to act is usually when something has changed. That could be a renewal notice, a price change, a move, a new smart meter, a new appliance, a solar installation, a concession change or a bill that no longer matches your expected usage. If nothing has changed, it can still be worth checking annually, but the comparison should be calm and evidence-led.

Before switching, keep a copy of your current bill and any written plan summary. If a retailer advertises a benefit, check whether it is built into the rates, paid as a credit, tied to direct debit, limited to a benefit period or dependent on staying with another service. Those details decide whether the offer is useful after the first headline moment has passed.

What a good answer looks like

A good answer should explain the trade-off, not just point to one rate. For some households the best option is the lowest estimated annual cost. For others it is predictable billing, better concession handling, a plan that suits solar exports, or a tariff that fits when the home actually uses energy. If an article or offer cannot show which assumptions it used, treat the result as a starting point rather than a decision.

How to use CompareUs after reading

Use this guide as a checklist, then move to the relevant CompareUs tools. Start with our gas comparison page, estimate bill impact with the gas calculator, and browse more energy guides if you are also comparing electricity or appliance choices.

Sources reviewed

• energy.gov.au - Electrification - Used for household electrification and fuel-switching context.
• energy.gov.au - Heating and cooling - Used for household heating share, gas-heater safety and efficiency context.
• energy.gov.au - Hot water systems - Used for hot-water system comparison context.
• energy.gov.au - Rebates and assistance - Used for rebate search, state scheme and Energy Bill Relief Fund status.
• energy.gov.au - Solar PV and batteries - Used for rooftop solar and battery context.

CompareUs may receive a referral fee when you click or apply through some links. This does not change the price you pay. Our goal is to help Australians compare options clearly and make informed decisions.